FAQs
Air Evolution™
Can the Air Evolution™ be washed or cleaned?
Yes. The cover is removable and machine washable and the inflatable air core can be surface cleaned by hand. To wash the cover, open the zipper on the back to remove the inflatable core and machine wash the cover on gentle, cold cycle.
How does the Air Evolution™ deflate and compact to fit its carrying pouch?
To deflate the inflatable air core, face the valve away as you simultaneously squeeze the base of the valve and slowly roll the pillow up. This will place the pressure needed to release the air and effectively deflate the pillow. Once deflated and rolled up, the pillow should easily fit within the carrying pouch, and the pouch’s adjustable sliding toggles can be used to securely close the top opening and attach to the handle of your bag or purse.
Evo Microbead™
Does the Evo Microbead™ come with a carrying case?
No, however the adjustable sliding toggles can be used to attach the pillow to your bag, purse, backpack, or suitcase.
Can the Evo Microbead™ be washed or cleaned?
The pillow is not machine washable, but it can be surface cleaned by hand. Do not immerse the pillow in water and avoid any extreme temperatures, as it could damage the microbeads.
Evolution® Cool
Can the Evolution® Cool be machine washed?
Yes. The cover is removable and machine washable. The memory foam can be surface cleaned by hand with a damp cloth.
To remove the cover, unzip the back and pull the cover forward until you can see the metal toggle clips on the inside of each side. Pull the clips away from the pillow, align them with the cord, and push them through the hole to remove them. Then completely remove the cover for machine washing.
To put the cover back on, begin push the pillow back into the cover and align the cover toggle holes with the pillow toggle holes — do not fully enclose the cover around the pillow yet. Once the front holes are aligned, slide the metal toggle clips through the holes and then open the toggle to hold it in place. Then proceed to pull the cover over the rest of the pillow. You may have to adjust the fabric in a few places to properly align it to the shape of the pillow. Finally, zip the back and enjoy your pillow!
Evolution® S3
Can the Evolution® S3 be machine washed?
Yes. The cover is removable and machine washable. The memory foam can be surface cleaned by hand with a damp cloth.
How do I install my Evolution® S3 on airplane seat wings?
Below is the instruction sheet on how-to attach your new Evolution® S3 travel pillow to your airplane headrest wings.
1) Angle the airplane headrest wings forward (if applicable).
2) Unfasten the Velcro® and loosen the straps on the back of the pillow.
3) Loop the straps over each of the wings and refasten the Velcro® on both sides.
4) Push the headrest wings back, position the headrest and pillow to your desired height, and enjoy!
1) Angle the airplane headrest wings forward (if applicable).
2) Unfasten the Velcro® and remove straps from the strap loops on the back of the pillow.
3) Stretch straps up and behind each side of the seat wings coming out the top.
4) Attach the ends to each other and tuck behind the headrest to secure.
5) Push the headrest wings back, position the headrest to your desired height, and enjoy!
IMPORTANT: Straps not for use in automobiles.
How does the Evolution® S3 and Evolution Cool® compact to fit its carrying bag?
Below are two techniques on how to get your Evolution® Pillow into a compact and manageable size.
1) Place the pillow into the back with the pocket facing up.
2) Press the pillow down with your fist and tighten drawstring around your wrist.
3) Remove your hand from the opening and slide the toggle down to tighten and seal the top.
4) Starting on the female Velcro side, fold/roll the entire bag in half and seal it firmly with the male Velcro strip.
1) Simply roll the pillow up from one cord toggle to the other cord toggle while squeezing tightly.
2) If rolled properly, it should look like a cinnamon roll.
3) Place the rolled pillow into the travel bag, wrap the bag’s Velcro® strap around it tightly, and fasten the strap to the soft Velcro® patch on the other side.
4) Tighten the bag’s drawstring to securely close the top opening.
5) The Velcro® strap can also be used to attach the travel pillow to your bag or luggage, saving you even more space and leaving your hands free!
How can I remove the memory foam smell?
Generally, all memory foam products have a slight temporary odor that will dissipate. To quicken this process, we recommend you wash the velour cover, gently surface clean the memory foam, and allow it a few days to air out.
Connecting Toggles: Insert the plastic tip on the left toggle into the small hole on the right toggle (which is just below the square release button).
Opening Toggles: Firmly press the square release button on the right toggle and pull apart both toggles. It’s important to note that the toggles were designed to fit together tightly in order to support the full weight of your head, so don’t be concerned if they stick a little bit.
Adjusting Toggles: While the toggles are connected, hold both of the rectangular plastic end pieces in one hand, press in the outer circular pieces on each toggle with the other hand, and slide the toggles up or down to your desired comfort setting.